Elevate RubberGard EPDM Single-Ply System over Concrete Decks
Florida product approval and Miami-Dade NOA.
Check: Structural concrete (min. 2500 psi) or concrete plank only; accessories not listed in the NOA are not approved.
Approval details
- Manufacturer
- Elevate · 26 Century Boulevard, Suite 205, Nashville, TN 37214
- Category
- Roofing · Low-slope · EPDM single-ply system
- Approved in HVHZ
- Yes
- Deck type
- Concrete
- NOA approved
- 11/13/2025 · replaces NOA 19-0313.06
Official documents
Verify on floridabuilding.org ↗Products this NOA lists
FullForce EPDM · RubberGard EcoWhite · RubberGard EcoWhite PT · EPDM FormFlash · Reinforced Perimeter Fastening Strip · BA-2004 T · Single-Ply LVOC Bonding Adhesive · Single-Ply LVOC Bonding Adhesive 1168 · Water Based Bonding Adhesive-P · Single-Ply QuickPrime Primer · EcoWhite QuickSeam Splice Tape · I.S.O. Stick · I.S.O. Twin Pack Insulation Adhesive · QuickPrime Plus · Single-Ply LVOC Primer · QuickSeam Flashing · QuickSeam Batten Cover · QuickSeam Joint Cover · QuickSeam Tape · QuickSeam R.M.A. Strip · Splice Wash SW-100 · Pourable Sealer S-10 · V-Force
Quick answers
Is Elevate RubberGard EPDM Single-Ply System over Concrete Decks approved in the HVHZ?
Yes, on concrete decks. The NOA expires 08/10/2028.
Public record. Always verify on the official source before you permit.