● ActiveHVHZ approvedLast checked Oct 21, 2026

Elevate RubberGard EPDM Single-Ply System over Steel Decks

Florida product approval and Miami-Dade NOA.

My product sheet: 0 →

Check: Min. 22 ga steel deck over min. 1.5 in ISO 95+ GL insulation; max -52.5 psf (-45 psf spot-attached).

Miami-Dade NOA23-0801.07

NOA expires08/10/2028In 22 months

Approval details

Manufacturer: Elevate · 26 Century Boulevard, Suite 205, Nashville, TN 37214
Category: Roofing · Low-slope · EPDM single-ply system
Approved in HVHZ: Yes
Deck type: Steel
NOA approved: 11/13/2025 · replaces NOA 19-0313.05

Official documents

PDFMiami-Dade NOA 23-0801.07miamidade.gov

Verify on floridabuilding.org ↗

Products this NOA lists

FullForce EPDM · RubberGard EcoWhite · RubberGard EcoWhite PT · EPDM FormFlash · Reinforced Perimeter Fastening Strip · BA-2004 T · Single-Ply LVOC Bonding Adhesive · Single-Ply LVOC Bonding Adhesive 1168 · Water Based Bonding Adhesive-P · Single-Ply QuickPrime Primer · EcoWhite QuickSeam Splice Tape · UltraPly Bonding Adhesive · I.S.O. Twin Pack Insulation Adhesive · I.S.O. Stick · QuickPrime Plus · Single-Ply LVOC Primer · QuickSeam Flashing · QuickSeam Batten Cover · QuickSeam Joint Cover · QuickSeam Tape · QuickSeam R.M.A. Strip · Splice Wash SW-100 · Pourable Sealer S-10

Quick answers

Is Elevate RubberGard EPDM Single-Ply System over Steel Decks approved in the HVHZ?

Yes, on steel decks. The NOA expires 08/10/2028.

Public record. Always verify on the official source before you permit.